30L Square-Tank Industrial Wet/Dry Vacuum Cleaner – 2000W, 2-Stage Filtration, for Construction Site, Workshop

◆ Professional wet and dry vacuum cleaner with automatic filter cleaning function
◆ Multi-stage filtration system; the HEPA filter captures extremely fine dust and other minute particles.
◆ 1600W high-performance two-stage motor
◆ Equipped with a power regulator, allowing power output to be controlled as needed
◆ The HEPA filter is cleaned every 15 seconds via a reverse cyclone mechanism.
◆ Automatic, sensor-driven filter cleaning ensures consistently powerful suction.
◆ Integrated power outlet with synchronization function.
◆ Automatic water level sensing.
◆ Multi-functional storage platform.

30 liters. That’s plenty big. This capacity wasn't chosen arbitrarily.

On a typical construction site—involving tile cutting, wall drilling, and floor cleanup—the resulting debris amounts to roughly 20 to 25 liters. While a cylindrical vacuum might be rated at 30 liters, its actual usable capacity is closer to 24 liters; because the top narrows while the bottom widens, debris tends to pile up and stop fitting once it reaches the upper section. A square-bin vacuum, however, features straight sides; when packed to the brim, it truly holds a full 30 liters.

This means you won't have to stop halfway through a job just to empty the dust bin. You can complete all the work across the entire site and handle the final cleanup in one go at the end. You won't encounter that frustrating scenario where "the bin fills up halfway through the job, forcing you to run off to empty it before you can return to finish."

The square bin shape is also better suited for holding debris. Broken brick shards, cement granules, and cut tile strips—these angular materials tend to jam against one another inside a round bin, leaving empty voids. The right-angle corners of a square bin allow these materials to fall naturally without snagging or bridging, resulting in a much denser, more efficient fill.

1600 Watts. Simultaneous wet and dry suction.

Many industrial vacuums claim to be "wet/dry" compatible, but in reality, you have to swap out the filter cartridge to switch between vacuuming liquids and vacuuming solids. The user manual often contains a line of fine print stating: "Please remove the filter bag before vacuuming liquids." If you forget to remove it, the filter bag will absorb the water and become completely clogged. Conversely, if you *do* remove it to vacuum liquids, you then have to reinstall it if you want to switch back to vacuuming dust.

This unit requires none of that hassle.
It vacuums up dust, debris, and water all at once. The fine dust left over from cutting tiles, a spilled bucket of water on the floor, or the rubble dislodged during drilling—simply run the hose over them, and they vanish completely. The motor boasts a genuine 1600-watt output with no exaggerated suction claims. The hose features a 40mm internal diameter, allowing even large chunks of debris to pass through easily. The floor brush is constructed from stainless steel, making it durable enough to withstand heavy impacts and accidental trampling.

Dual-Layer Filtration. No Clogging, No Dust Blowback.
The first layer consists of a cloth filter bag designed to trap large particles. Broken brick shards, cement lumps, and coarse dust are all stopped right here. The fabric used for this bag is extra-thick—unlike the flimsy material found in cheap models, it won't tear the moment you start vacuuming. You can empty it and reuse it time and time again.

The second layer is a HEPA-grade filter cartridge designed to capture fine dust. Micron-sized particles are effectively trapped at this stage. The air exhausted by the vacuum is actually cleaner than the original air found on the construction site. You won't encounter that frustrating "suck in the front, blow out the back" scenario—a common issue with standard vacuum cleaners where a clogged filter causes dust to spew out of the exhaust port, rendering all your vacuuming efforts completely futile.

The advantage of this dual-layer filtration system is that the filter rarely gets clogged.
The typical flaw of ordinary vacuum cleaners is this: after just five minutes of use, the filter becomes caked with a layer of dust, causing suction power to drop significantly. You are forced to stop, open the lid, and tap the filter clean. You put it back in, vacuum for another five minutes, and—sure enough—it’s clogged again.
This unit is different. Dust is first trapped by a cloth bag, so only the finest particles ever reach the actual filter element. You can complete an entire job at a construction site, and the filter will still remain clear. You won't have to repeatedly stop working just to tend to the machine.

Voltage: 220–240V
Frequency: 50Hz/60Hz
Power: 1500W
Suction: ≥20 kPa
Capacity: 42L
Material: PP
Accessories:
3m Hose
Cylindrical HEPA Filter
Dust Bag
Outer Carton Dimensions: 51.0 × 35.0 × 51.7 cm
Gross/Net Weight: 13.0 / 12.0 kg