Professional Grade Integrated Lithium Vacuum Lifter | 270kg Heavy Duty Smart Suction Cup for Textured Stone & Porous Tiles | High-Precision Digital Control
This top-of-the-line built-in lithium-ion vacuum suction cup is specifically designed for repairing rough stone surfaces, including corners, rough stone, and urban sewers. It boasts a powerful 270kg load capacity, an intelligent self-cleaning system, and an adjustable negative pressure mode (-20Kpa to -80Kpa). With a long-lasting 4500mAh battery and support for wet-work drainage, it's an essential professional-grade handling tool for high-end engineering teams.
Product Description
Core Breakthrough: Intelligent Pressure Regulation and Monitoring (Precision Engineering)
Adaptive Pressure Mode (-20Kpa to -82Kpa): Built-in precision intelligent electronic sensor (error ±0.5Kpa). Users can manually preset pressure values based on material characteristics (e.g., ultra-thin fragile glass or porous concrete). Automatic shutdown upon reaching the set value and automatic pressure replenishment upon pressure loss, balancing energy optimization and construction safety.
Intelligent LED Interaction Center: The display screen provides real-time feedback on pressure, remaining battery power, and estimated load-bearing capacity. Construction personnel no longer need to rely on experience or guesswork; data-driven management ensures flawless operation at heights and under heavy loads.
Highly Competitive Industrial Design (Heavy-Duty Design)
Self-Cleaning Filtration System (Self-Cleaning Technology): Innovative three-hole design at the bottom. After each pressure release, the airflow reverses direction, instantly removing 5μm-level dust and impurities from the filter surface. This "reverse pulse" self-cleaning function significantly extends the lifespan of the polymer filter element and ensures stability in high-dust environments.
All-weather drainage and venting function: Addressing common water accumulation issues at construction sites, the machine features a dedicated drainage hole on the side. Even if water or liquid is present on the adsorption surface, it can be drained through internal channels, effectively protecting the core motor from corrosion.
One-piece cast aluminum handle: Compared to ordinary plastic handles, the cast aluminum structure will not deform when subjected to a 270kg extreme tensile force. Combined with a high-strength engineering plastic shell, its weight is less than 1.5kg, achieving an exceptional thrust-to-weight ratio.
Battery Management and Endurance (Battery Management System)
4500mAh power lithium battery: Standby time up to 90 days. Supports fast charging technology, replenishing 80% of the battery in 3 hours.
Long-term operation: The optimized integrated control board (BMS) ensures the machine can support 24-hour continuous high-intensity frequency cycling, with over 100,000 start-ups.
Extensive Material Versatility: Our high-polymer rubber foam seals (resistant to -60°C to 120°C) are designed for the following materials:
Non-porous materials: Polished ceramic tiles, flat glass, sheet metal, engineering plastics.
Semi-porous/roughened materials: Bush-hammered marble, flamed stone, antique bricks, concrete blocks, masonry.
Irregular surfaces: Patterned metal sheets, threaded/faceted glass, textured solid wood furniture.
product Advantages
Maximum cutting length: 1600mm
Maximum cutting thickness: 3-15mm
Base material: Extra-wide channel steel base plate, 100mm wide
Rail material: Square steel
Cut wheel
Equipped with 32 bearings, 20x45 coarse guide rails, and an angle guide, facilitating cutting at any angle. Extra-wide channel steel base plate, 100mm wide.
Professional Tile Laying Tool Manufacturer and Trader | Factory Direct Supply & Global Delivery